• M-F  7am - 5pm PST
  • (951) 303-4600
  • Info@mxrtech.com

Type P

Technical Information:
- Bulletin Chemical & Processing
- Typical Mixing Applications
- Water and Waste Water Treatment
- Static Mixer Specification Sheet

Other Industries
Cosmetics & Detergents
Energy Minerals & Ore
Processing Natural Gas
Processing Pharmaceuticals
Pollution Control
Potable Water Treatment
Power Generation
Pulp & Paper Processing
Reverse Osmosis
Feed Pretreatment
Scrub Noxious Gases with caustic
Vegetable Oil Processing

 

Type "P" Static Mixer with Side Port

The standard Type "P" Static Mixers includes a side port for the introduction of an additive or chemicals to be mixed and employ a simple, reliable design to provide the ultimate in mixing. It achieves high mixing efficiency through multiple-action mixing. The liquid usually water and additives are mixed through two-by-two division thus increasing geometrically with each mixing element added, cross-current mixing which randomizes water droplet distribution by direct steam impingement and back-mixing which dramatically improve turbulence and mixing. These three mixing action occur simultaneously in each mixing element section. The "P" Static Mixer solves the problem when mixing of two liquids is required. Standard Material of construction is Carbon Steel. Available in pipe sizes from 3/4" to 48" diameter. Typical mixing application includes mixing water or chemicals in Water and Wastewater Treatment Plants, Chemical Plants, Oil Refineries, Oil & Gas Plants, Food Processing, Pulp & Paper Mills.

Static Mixing Applications & Industries
General Applications

- Blending Dispersion
- Liquid-Liquid and Gas-Liquid
- Heat Transfer
- Mass Transfer

Process Applications
A wide variety of process applications take advantage of static mixing technology including:
Laminar Flow
- High – Low Viscosity Mixing
- High Viscosity Mixing
- Heat Transfer Enhancement
Turbulent Flow
- Dispersion of Immiscible Liquids
- Gas-Liquid Contacting
- Gas Mixing Low Viscosity Liquids Mixing
Industrial Applications
Process industries utilize static mixers in a broad range of applications such as: Plastics Extrusion
Homogenize colorant, melt temperature and viscosity prior to mold/die.
Polymer Production
- Mix low viscosity additives into polymer melts
- Heat and cool polymers
Chemical Industry
- Dispersing immiscible liquids in washing and extraction operations
- Dissolve gases into liquids such as NH3, SO2, Cl2
- Heat and Cool viscous materials
- Mix gases with air in front of catalytic reactors such as in the production of Nitric       Acid
- Mix Reactive materials in short length
Food and Beverage Industry
- Add CO2 to fruit juices, wine, beer, etc.
- Blend fruit juice concentrates
- Dilute concentrates/tomato paste
Water & Wastewater Treatment
- Aerate drinking water
- Dissolving CO2, O2, Cl2, ozone into water
- Flocculants dilution and addition to waste water
- Mix ground and surface waters
- pH control of waste water with acids/bases
Oil, Gas & Petrochemicals
- Blend additives into gasoline, fuel oil, lubricating oils
- Blend crude oil from various storage tanks to provide uniform feed to refinery
- Contact crude oil and water to optimize desalter performance
- Contact used lubricating oils with sulfuric acid for waste oil regenerations
- Mix steam and methane feed to reformer

For Further Assistance, Please Contact Us

Looking for more information? Contact us directly at (951) 303-4600.